RS101ICE-GE07 10.1" 700 Nits High Brightness Touch Screen

RS101ICE-GE07 10.1" 700 Nits High Brightness Touch Screen

RS101ICE-GE07 is a 10.1-inch LCD display with 700 nits brightness, 1280×800 resolution and 800:1 contrast ratio. Its operating temperature range is -20 °C to 70 °C.

OEM / ODM Manufacturer

Factory Direct

Order & Lead Time

Sample Order 1 Unit MOQ
Bulk Order 10+ Units Tiered Discounts

Need 50+ units? Contact us for framework agreements.

verified_user

Flexible Warranty (1–5 Years)

Standard coverage for cost-sensitive projects, or a 3–5 year extended plan for mission-critical signage deployments.

ISO 9001-certified facility · CE, FCC, RoHS certified · 100% factory inspection on every unit.

Screen Diagonal10.1 inch
Brand RisingStar
Model NoRS101ICE-GE07
Active Area216.96(W)×135.6(H) mm
Resolution1280(RGB)×800, WXGA, 149PPI
Physical Size230.7(W)×152.55(H)×7(D) mm
Pixel ArrangementR.G.B. Vertical Stripe
Display Modea-Si TFT-LCD, LCM
Contrast Ratio800:1
White Luminance ( Center )700 NITS
Optical Response Time14/11 (Typ.)(Tr/Td)
Nominal Input Voltage3.3V (Typ.)
Frame Rate60Hz
Viewing Angle85/85/85/85 (Typ.)(CR≥10)
Weight [g]360g/375g( Typ.)
Interface TypeLVDS (1 ch, 6/8-bit), 40 pins Connector
Fuel Dispenser CompatibilityYes
Support Color262K/16.2M, 52% NTSC
Surface TreatmentAntiglare, Hard coating (3H)
RoHS ComplianceRoHS Compliance
Operating Operating Temperature-20~70 °C
Storage Temperature-30~80 °C

RS101ICE-GE07 — 10.1" ICE Series Touch LCD Module for Fuel Dispenser Applications

The RisingStar RS101ICE-GE07 is a purpose-built 10.1-inch WXGA TFT LCD module engineered specifically for outdoor fuel dispenser and gas pump applications. As part of RisingStar''s ICE (Industrial Cold-Environment) wide-temperature series, this display delivers 700 nits of consistent brightness while maintaining rock-solid reliability across the entire -20°C to +70°C operating range — no compromises, no blackouts, no excuses.

At the heart of the RS101ICE-GE07 is a 1280×800 IPS panel with 85° four-way viewing angles. Whether your customers are standing in direct sunlight at noon or refueling under harsh forecourt floodlights at night, the anti-glare surface and crisp 149 PPI resolution keep fuel prices, payment prompts, and promotional content razor-sharp and instantly readable.

Why Fuel Dispenser Integrators Choose RS101ICE-GE07

  • ICE-Grade Wide Temperature — Tested and validated for continuous duty from -20°C to +70°C operation and -30°C to +80°C storage. No heater needed, no cold-start delays.

  • 700 Nit Sunlight-Readable Brightness — Bright enough to stay visible under direct tropical sun, yet power-efficient enough to keep thermal load low inside sealed dispenser enclosures.

  • IPS Normally Black Technology — Deep blacks, high contrast (800:1), and accurate colors even when viewed off-axis — essential when the display is mounted at an angle inside a pump housing.

  • LVDS 40-Pin Interface — Standard 1-channel LVDS (6/8-bit), drop-in compatible with the vast majority of ARM and x86 embedded boards used in fuel dispensing systems.

  • Optional PCAP Touch — Add projected capacitive touch for interactive payment flows, PIN entry, or loyalty program interfaces. Works with gloves, handles light rain, and won''t false-trigger from fuel nozzle proximity like infrared touch would.

  • Compact Mechanical Footprint — 230.7×152.55×7 mm outline fits standard fuel dispenser bezel cutouts; 360g weight keeps mounting stress minimal.

  • 50,000-Hour LED Backlight Life — Designed for 24/7 operation. At 12 hours a day, that''s over 11 years before reaching half-brightness.

Real-World Deployment Profile

Gas stations are brutal environments for electronics. Ambient temperatures inside a closed dispenser can exceed 60°C on hot asphalt forecourts, while winter nights in northern regions routinely drop below -15°C. Standard commercial LCDs fail in these conditions — either the LC fluid loses alignment (permanent dark spots), the backlight driver shuts down, or the touch controller drifts out of calibration.

The RS101ICE-GE07 addresses every one of these failure modes:

  • The ICE-rated LC fluid maintains proper molecular alignment through extreme temperature swings.

  • The custom-designed backlight uses high-temperature-rated LEDs and a thermal management path that channels heat away from the LC layer.

  • The industrial-grade LVDS driver IC stays within spec from -30°C to +85°C ambient.

  • The anti-glare hard coating (3H) resists fuel vapor haze buildup and can be wiped clean with standard cleaning agents.

Fuel Dispenser Compatibility

The RS101ICE-GE07 has been tested and validated with leading fuel dispenser controller platforms including Gilbarco, Tokheim, Wayne, and Tatsuno systems. The standard LVDS interface, 3.3V power rail, and widely-supported 1280×800 timing mean you can replace aging 7" or 8" panels with minimal firmware changes. Custom mounting brackets and cable harnesses are available through RisingStar''s OEM integration team.

Why RisingStar for Fuel Dispenser LCDs?

  • Proven track record — RisingStar LCD modules are deployed in fuel retail networks across Europe, Southeast Asia, and the Middle East.

  • Long-term availability — We guarantee supply continuity for 5+ years on the RS101ICE-GE07, because we know fuel dispenser certifications are expensive to re-do.

  • Customization available — Brightness tuning, optical bonding, touch integration, custom FPC cable lengths, and enclosure-specific bracket design.

  • ISO 9001 / RoHS / CE — Every module ships with full compliance documentation.

Need a display that won''t quit when the sun comes out or the temperature drops? RS101ICE-GE07 is the screen your fuel dispensers deserve.

Product FAQs

How bright is the RS101ICE-GE07?

It is rated at 700 nits (cd/m²) brightness.

What are the main display specifications?

It uses a 10.1-inch panel, 1280×800 resolution, 800:1 contrast ratio.

What is the operating temperature range?

The operating temperature range is -20 °C to 70 °C.

Is this product available for OEM or ODM customization?

Yes. RisingStar is an OEM/ODM manufacturer and accepts customization requirements for volume orders; contact the sales team with your target specification.

What interface does the RS101ICE-GE07 use?

It adopts LVDS (1 ch, 6/8-bit), 40 pins Connector interface.

What is the power input requirement for the RS101ICE-GE07?

The power input requirement is 3.3V (Typ.).

What is the viewing angle?

The viewing angle is 85/85/85/85 (Typ.)(CR≥10).

How is the screen surface treated?

The panel surface treatment is Antiglare, Hard coating (3H).

What panel technology does the RS101ICE-GE07 use?

It uses a-Si TFT-LCD, LCM.

Is this touch display suitable for fuel dispenser / gas station outdoor use?

Yes, it is designed for 24/7 gas station fuel dispenser applications, wide temperature and sunlight readable.

star Related Products

Interested in this product?

Get in touch with our experts for a personalized quote or technical support.