10.1" Fuel Dispenser Touch Panel — Outdoor High-Brightness, Industrial-Grade Touch Display for Fuel Dispensers
Overview
The RisingStar 10.1inch Fuel Dispenser Touch Panel is a purpose-built, industrial-grade outdoor touch display engineered for gas stations, fuel dispensers, EV charging kiosks, and forecourt advertising. Combining cinema-scale viewing with sunlight-readable brightness, IP-rated durability, and modular serviceability, this solution delivers reliable interactive UX and high-impact commercial messaging under real world outdoor conditions.
Specially designed to provide a perfect solution for Fuel Dispenser Touch Panel
Key selling points
Sunlight readable up to 1500 nits (configurable: 500 to 1500 nits)
True outdoor protection — IP65 / IP66 enclosure options and salt/fog protection available
Industrial temperature range and built-in thermal management for –30°C to +70°C operation
10-point projected capacitive touch (glove and stylus support options) with anti-glare tempered glass
Modular, field-serviceable design for quick swap of power/control modules on site
Long lifetime LED backlight: ≥ 50,000 hours (typical L70)
Multiple I/O and integration options (Ethernet, HDMI, RS232/485, USB, optional 4G/5G)
Tailored mounting kits for pump-top, pole, or canopy integration; on-site installation packages available
Product name: RisingStar 10.1″ Fuel Dispenser Touch Panel
Use cases: pump-top interactive UI, forecourt advertising, POS kiosks, unattended fuel payment, real-time promotions
Brightness: 500 to 1500 nits (model-dependent)
Touch: Projected capacitive 10-point (supports gloved operation with optional firmware)
Protection: IP65 / IP66, anti-corrosion aluminum chassis, sealed I/O
Lifetime: ≥50,000 hours (LED backlight)
Certifications: CE / RoHS (standard); optional UL / FCC / local certifications on request
Note: the table below lists typical/default configurations and available options. Exact specification per SKU should be placed in the product variant sheet or datasheet PDF.
| Category | Specification (Typical / Configurable) | Notes |
|---|---|---|
| Screen size | 10.1″ diagonal | Custom sizes and bezel options available |
| Panel type | Industrial LCD with direct (full-array) LED backlight | Direct backlight for uniform luminance |
| Native resolution | 1280 × 800 (FHD) | 4K recommended for detailed UI/ads |
| Brightness (typical) | 500 to 1500 nits | Auto dimming via ambient light sensor |
| Contrast ratio | ≥ 1200:1 (typical) | Model and brightness affect contrast |
| Touch technology | Projected capacitive (PCAP), 10-point | Optional IR or resistive available |
| Touch surface | Tempered anti-glare glass, 6–8 mm | Chemically strengthened option available |
| IP rating | IP65 (standard) / IP66 (option) | Sealed chassis + waterproof connectors |
| Ingress protection notes | Corrosion-resistant aluminum housing, gasket seals | Salt fog option for coastal sites |
| Operating temp. | –20°C to +70°C (typical) | Active thermal control (heaters + fans or Peltier) as needed |
| Storage temp. | –20°C to +70°C | For non-operational storage |
| Backlight lifetime | ≥ 50,000 hours (L70) | High efficiency LED array |
| Power input | AC 100–240V (50/60 Hz) or 24V DC option | Power consumption varies by brightness level |
| Typical power draw | 200–1200 W (depends on brightness & thermal system) | Provide model-specific power budget |
| Connectivity | HDMI 2.0, DP, USB, Gigabit Ethernet, RS232/485 | Optional 4G/5G, Wi-Fi, Bluetooth |
| Control/OS | Android / Linux media player / Windows IoT (selectable) | SDK/API available for integration |
| Mounting | Pump-top pole, canopy, VESA, custom bracket kits | Tamper-proof mounting options |
| Weight | Model dependent | Exact weight per SKU in datasheet |
| Certifications | CE, RoHS (standard) — UL/FCC on request | Certification files available on request |
| Warranty | Standard 1-year; extended 2–5 year service contracts available | On-site SLA options available |
We use a full-array direct LED backlight with per-zone drive and automatic ambient light sensing. This provides:
consistent luminance across the entire 10.1″ area, avoiding hotspots;
dynamic brightness control to reduce power consumption in low-light conditions;
reliable color fidelity at high nits by maintaining LED drive stability.
The 10-point projected capacitive touch layer is laminated behind chemically strengthened glass. Firmware supports:
glove mode and stylus input;
multi-touch gestures for rich UX;
debounce and noise filtering tuned for electrical interference common in fuel pumps.
Outdoor forecourt screens must survive direct sun, heat from equipment, and cold starts. Our design includes:
passive heat sink with weatherproof vents and filtered airflow;
optional active thermal modules (fan or Peltier) for extreme climates;
heater strips for sub-zero startups;
temperature sensors with remote telemetry for proactive maintenance.
Powder-coated aluminum enclosure with anti-corrosion treatment;
gasketed access panels for fast field module swaps (power supply, player, control board);
sealed cable glands and corrosion-resistant connectors;
modular spare kits to reduce mean time to repair (MTTR).
API / SDK
We provide an integration SDK (REST + WebSocket examples) to trigger local UI changes, start video playlists, send telemetry, and read touch events. Custom OEM integration for POS/payment systems and pump controllers is supported.
Signal & power
Standard interfaces: HDMI (video), Ethernet (content/management), RS232/485 (legacy pump interfaces). Power options include AC 100–240V or 24V DC for solar/battery systems.
Remote management
Optional RMS platform: content scheduling, remote diagnostics (fan speed, temperature, power), firmware updates and alerting.
Case Study — CityFuel Chain, Region X (example)
Deployment: 12 forecourt pump islands fitted with 10.1″ touch panels as canopy-mounted pump-top displays.
Challenge: High ambient light, coastal salt exposure, and winter temperatures to –25°C.
Solution: 4000 nits configuration with IP66 housing, salt-fog coating, and active thermal kit.
Outcome: 18 months operation with zero screen failures; promotions drove +22% incremental in-store spend per pump visit; remote diagnostics reduced on-site technician visits by 40%.
(Replace the above with your real customer name and metrics when permitted.)
Pre-installation checklist
Confirm mounting interface and canopy structure load capacity.
Provide power feed (AC 100–240V or 24V DC per chosen SKU).
Confirm network connectivity (Ethernet preferred).
Check environmental exposure: direct sun hours, prevailing wind, salt exposure.
Commissioning steps
Mount bracket and perform mechanical alignment.
Connect power and ground. Verify earth grounding per local code.
Connect video/data interfaces; power on and run display diagnostics.
Calibrate touch (on-site procedure; automatic calibration available).
Register device on RMS for remote monitoring and OTA updates.
Routine maintenance
Quarterly: Clean glass with approved cleaner; inspect seals.
Annually: Verify thermal system, firmware version, and run brightness calibration.
On-fault: Remote diagnostics pre-checks; if hardware swap needed, swap modular power/control module per SLA.
Q: Will the screen be readable in full midday sun?
A: Yes—models up to 1500 nits ensure excellent readability. We recommend 3000–4000 nits for most sites; 1500 nits for extreme bright environments.
Q: Can it be used with gloves or in wet conditions?
A: PCAP touch supports glove mode and is fully functional when wet; glass and sealing ensure IP65/IP66 protection.
Q: How long does the backlight last?
A: Typical LED backlight life is ≥ 50,000 hours (L70). Lifetime varies with brightness profile and operating temperature.
Q: Can you integrate with our POS or pump controller?
A: Yes. We provide SDKs and can develop integration with standard protocols (Ethernet, RS232/485) or custom integration on request.
Q: What certifications do you provide?
A: Standard CE and RoHS are included. UL/FCC/other local approvals are available per order (additional lead time and cost).
For pricing, lead time, custom colours, certification packs, and site survey bookings, please contact our Forecourt Solutions Team:
Email: sales@risinglcd.com
Phone / WhatsApp: +86 15889469208
Ask a quote for the latest price and one of our team members will respond as soon as possible.
